Speak to an engineer today! 214.926.4950


  • SLIM-2I-P 4-20mA Isolator, 2 Channels Active Output

    Din Rail Mounting, Ultra-Slim (0.5") Case


    What it does:
    This auxiliary powered isolator receives 4–20mA process current input, and provides an active 4–20mA output signal.


    This auxiliary powered isolator receives 4–20mA process current inputs, and provides active 4–20mA output signals. It is ideal for measuring signals commonly produced by position, acceleration, current, and a vast range of other industrial sensors, and offers a low cost isolation solution with top-of-the-line specs.

    At a glance:

    • 2 x 4–20mA DC inputs
    • 2 x 4–20mA DC active outputs
    • No fuss installation No DIP switches, no calibration, simple wiring
    • High accuracy – better than 0.05%!
    • Superior noise resistance Designed for stable, accurate performance, even in noisy environments, with excellent resistance to electromagnetic interference
    • 2 isolated channels in a compact 0.5" case

    Along with high speed, accuracy and stability, it also offers input and output protection for polarity and inadvertent connection to 30V DC. With 2 independent channels which are isolated up to 2.5kV, your control system will be protected from transients and noise:

    • No more signal cross talk
    • No more ground loops
    • DC/AC common mode voltage rejection
    • Over range protection
    Input signal
    4–20mA DC (2 channels)
    Compliance voltage
    5V max
    Power supply
    10–30V DC (0.8W max per output channel)
    General Specifications
    <0.05% of span (typical)
    Ambient drift
    <0.01% of span/°C
    Isolation test voltage
    2500V RMS
    RF immunity
    <0.5% of span
    Response time
    <50msec (0–90%, 100–10%)
    Working isolation voltage
    300V AC
    Linearity & repeatability
    <0.03% of span (typical)
    Current protection
    By PTC
    Analog Output (Retransmission)
    Number of analog outputs
    Analog output type
    4–20mA DC active output (500Ω max load)
    35mm DIN rail mounting slim case
    Dimensions (H x W x D)
    3.54 x 0.49 x 4.41"
    (90 x 12.5 x 112mm)
    Environmental Conditions
    Storage temperature
    –4 to 185°F (–20 to 85°C)
    Specification range
    –4 to 158°F (–20 to 70°C)
    Calibration temperature
    68–82°F (20–28°C)
    Certifications & Compliances
    Emissions (EN 61326-1). Immunity (EN 61326-1). Safety (EN 61010-1)

    SLIM 4-20mA Isolator Series Manual SLIM 4-20mA Isolator Series Manual 16V04, 10-Mar-2016 | (257 KB)

    SLIM-1I-P 1 x channel, 24V DC powered
    SLIM-2I-P 2 x channels, 24V DC powered
    E.g. Order SLIM-1I-P or SLIM-2I-P

All prices are in US Dollars. For pricing in other currencies, please contact us.